Bong Joint Size Guide – How To Measure Your Joint Size & Gender

What is CBD manufacturing?

CBD Skincare
Use this hyperlink to also get 10% off your purchase of a new downstem or bowl. Glass joints have turn out to be standardized so you can change between totally different bong bowls, ashcatchers, and other equipment. We’ll give an overview on common glass joint sizes and shapes. Also quite common, 18mm joint sizes are typically used on larger gadgets like straight tubes or beakers. This dimension provides optimal air move and can be identified using an analogous dime methodology.
This joint measurement is very common amongst commonplace water pipes, particularly small to medium-sized ones. To see if your joint size is 14mm, grab a dime and maintain it over the top of your pipe or bowl piece, whichever one is female empire glassworks hot dog steamroller. 14mm joints are slightly smaller than a dime, so if the dime doesn’t fit into it, the joint is most probably 14mm. If the joint issignificantlysmaller, although, you might have a 10mm joint on your palms.
Find a wonderful number of bong attachments and bong parts in your pipe or bong. We carry an excellent number of glass on glass adapters starting from 14mm to 18mm and 18mm to 18mm sizes in both female and male glass adapters. All of our glass on glass adapters are custom made utilizing borosilicate glass, giving industrial strength and sturdiness in your glass piece.

How to Quit Smoking With CBD
We have put together the simplest and easiest method to determine what measurement joint your bong is using just a penny. You don’t have to worry about finding a ruler simply follow the next few steps and you will know immediately what measurement joint you’ve. The picture above also helps you identify the bowl dimension utilizing a dime. A 14mm male bowl piece is about 3/4 of the size of a dime whereas an 18mm male bowl piece is nearly the complete measurement of a dime.
Some of the folks like customized-sized bong bowls which may be greater than 18mm. If you have an interest in shopping for a bong bowl and it is your first time, the 14mm can be the proper dimension for you.
When your bong’s glass bowl breaks, it may appear to be it’s time to purchase a brand new piece. And, while shopping for a new bong is certainly an option, you can also replace this half with a brand new bowl. Simply take away the old piece and place the new piece inside the downstem, and insert the new one.
These are the questions I had when purchasing my first piece. I’m here to shed some light on these questions for you. moking gadgets like rigs which might be designated for authorized concentrates or oils work best with male joints. So a male will only connect with a feminine, and vice versa.

This may be very easy in case your joint is male it’s going to use the identical sized female equipment. If your joint is female, it will use the identical sized male accessories. The joint size is described by a number of the form xx/yy.
The downstem you choose also is determined by the type of male bowl you propose to make use of. Like joints, glass bowls are available in 10, 14 and 18mm, so you need to ensure your new downstem matches your bowl. Downstems have one joint for the bowl and another to connect to the pipe.
Every components of your setup – from water pipes and dab rigs to bowls and ashcatchers – is both male or female. Once you have established whether your water pipe has a male or feminine joint, you’ll know which equipment dankstop lapis lazuli quartz stone pipe will match it. As frequent sense will let you know, a feminine joint will fit with male equipment, and a male joint will match with female accessories.
Usually, herb slides have two sizes, which are 14mm and 18mm, however different stores may offer extra sizes. As you possibly can see in the picture above, the penny goes down about midway on the 18mm feminine joint. The penny test is the simplest method to measure the glass joint, and determine what dimension your bong joint is. Another common joint measurement, 18mm joints are normally solely discovered on the largest bongs. This is to extend airflow for the reason that piece is way bigger.


The infographic beneath will break down all fitting sizes, male and female. These will apply to all contemporary bowls AND nails. When you first enterprise into the glass world, there are components that will come across as complicated.
If you employ water pipes or dab rigs, there inevitably comes a time when a part of your setup – whether it’s a bowl, nail, or something else – will take a fall and break. You must then start your seek for a substitute part, and it is just at this stage that many consumers realise they don’t know what they’re in search of. Yes, your bowl, ash catcher, adapter, drop down, nail, pretty much any accessory, has a gender. Now with this being stated, we can work out in case your pipe is a male or female. You should go away the hole between the water chamber and the female joint.
So lets say your brand new water pipe has a 14mm feminine joint, and you’re on the lookout for a bowl to properly match it. You will need a male 14mm bowl for the pieces to be suitable. All in all, joint sizes will have to match as much as be suitable, whereas the gender should be reverse. Almost all small-medium sized bongs and dab rigs have 14mm joints. To find out in case your joint is a 14mm all you need is a dime.

8mm Joints

The first number denotes the surface diameter of the top of the tapered male joint and the second number denotes the size of the joint. For example, a 14/20 joint (pronounced “fourteen-twenty”) is 14 mm wide the kind pen slim oil vape pen on the high and is 20 mm long. 19/22 and 24/40 are two other quite common joint sizes.

How To Measure

Simply including a quartz banger can do the trick or you can change your joint with any of our useful glass adapters. they allow you to change your current water pipe or dab rig joint to only about any dimension or gender you like.
With over 100 different bong equipment you will certainly find what you might be on the lookout for right here at Badass Glass. A glass adapter can allow you to convert a water pipe right into a dab rig. You can even use a glass adapter to make use of a unique dimension bowl on a different dimension joint. By design, all bongs and dab rigs have joints which are a certain measurement. The identical sizes are used for accessories, together with ash catchers, bowls, and more.

This is the baby joint and is usually used on mini rigs and small water pipes. There is no downstem that can go into this and only works with a 10mm male joint.
CBD for farm animals
Downstems are available 14mm to 14mm, 18mm to 18mm, 14mm to 18mm and 18 to 14mm. While these are the requirements for smoking provides, there are methods to change up each the gender and size of your favorite smoking device. Now you have determined whether your water pipe or rig is male or female, you should identify the scale of the joint. Joint sizes are measured in millimeters and customarily are available three commonplace sizes. We suggest shopping for your substitute downstems and bowls from online smoke store.

Easy Methods To Measure The Sizes Of Bong Bowls

These are made to fit larger attachments , and are generally found on bigger water pipes and oil rigs. The Joint Size refers back to the diameter of the outlet that your downstem or bowl will match into, usually these joint sizes don’t make much of a difference by themselves. For holding the components, removable parts are hooked up to the bongs. The most typical of them is the bowl piece, which often comes as a 14mm bowl or an 18mm bowl. If you need bowls in bigger sizes, you possibly can try to seek for them in numerous on-line shops.

A much less frequent measurement is the 10mm, normally used on very small dab rigs. Measure the glass joint measurement has at all times been a daunting task until now. With all of the totally different angles, sizes, and genders it could possibly get a little complicated.

How To Measure Your Bong Joint Size Using A Dime

From what we discovered in 3rd grade, numbers are rounded up or down. This is when it’s important to know in regards to the joint gender and measurement of your smoking supplies. Even should you purchase the mistaken accessories or bowl pieces, or just need to use your accessories on all of your items, you can always purchase adapters. If you need to know how to measure the sizes of bong bowls, you possibly can immediately evaluate two different bong bowls with one another to see the variations in measurement and elements.

  • Not solely can you employ a glass adapter as a converter but you may also use it as an extension.
  • You can use a pencil, pen or straight object you possibly can put all the best way down in your water pipe or bong.
  • Simply adding a quartz banger can do the trick or you’ll be able to change your joint with any of our useful glass adapters.
  • This is great for a lot of dab nails because the heat switch will only put stress on the adapter as a substitute of on to your water pipe.
  • For instance, I can convert my 18mm female water pipe joint right into a 14mm male joint that shall be nice for dabs.
  • they allow you to change your present water pipe or dab rig joint to only about any measurement or gender you favor.

vaping a disposable CBD cartridge
Bong joint sizes are available in three completely different sizes, 10mm, 14mm or 18mm. The commonest joint measurement is 14mm, you’ll hardly ever see 10mm joints and 18mm joints are normally only discover on the largest sized bongs. If you see anyone mention 14.5mm or 18.8mm joints don’t get confused these are the identical as 14mm and 18mm joints. The first and most necessary thing to know when figuring out the proper piece to buy is the joint gender. Bongs, bowls, nails, ash catchers, adapters, dropdowns, and all other bong elements have a gender, male or female.
This is the largest of the usual joint sizes used within the industry. These joints are used on many water pipes which have a downstem.
For occasion, I can convert my 18mm feminine water pipe joint into a 14mm male joint that might be nice for dabs. Not solely can you use a glass adapter as a converter however you can even use it as an extension. This is great for a lot of dab nails as a result of the heat transfer will solely put stress on the adapter as a substitute of directly to your water pipe.

Glass Accessories

The top can determine the glass joint measurement of the bong bowl. The standard joint sizes of bongs start from 10mm up to 18.8mm, whilst you can determine the 14mm glass joint dimension as a mid-dimension bong bowl. Often known as ‘Micro’ or ‘Nano’ joints, and sometimes as ‘12mm’ joints, 10mm joints are mostly discovered on smaller dab rigs and water pipes. 18.8mm joints, the biggest normal measurement, are often sold by smoke shops as 18mm or 19mm joints.
People tend to get confused when trying to determine what measurement glass joint they’ve. But it’s not as sophisticated as people make it out to be.
Green Roads CBD Gummies
If the dime is about the identical size as your joint its a 14mm. If the dime falls into the joint its an 18mm, and if the joint is much smaller than a dime you could have a 10mm joint. Before you go purchase a new bong bowl or nail you have to know the joint measurement of your bong or dab rig.

When we make the joints in home we only make them with holes not slits. The first thing you should know when you begin to purchase new equipment on your setup is the intercourse of the joint in your water pipe.

Using your measurements, you can now store for a new downstem. Shopping at on-line headshops allows you to discover the precise length and width you need.
If a dime falls into your joint then you’ve an 18mm joint. Again, for context, meaning we’re taking a look at roughly ten blunts or twelve to fifteen joints. And of course , should you wish to smoke out of glassware or bongs, the quantity of use you get will really be subjective to how you pack your bowls.
Smoking quitting
All you should know is that male pieces go into female joints and female pieces go on high of male joints. So if your bong has a female joint you’ll need to buy a male jointed bowl or dab nail and vice versa.
This is so as to have a pleasant giant downstem and have what we think is the proper empire glassworks small penis pipe dimension joint for your bowl. This 19mm male joint suits perfectly with a 19mm male joint.
For example, a drop down may convert a ten mm joint to 14 mm, allowing smokers to use a larger bowl. The dropdown can also convert dab rigs and bongs to a unique “gender”. This is the most typical glass joint size for rigs and water pipes that do not have a detachable down stem. A 14mm-10mm downstem is what’s used on this joint if you have a removable downstem.
Keeping these sizes consistent ensures that new elements are compatible with these items, and also maximizes the flow of the smoke. Dab rig and bong dropdowns are a way for smokers to transform the piece to a special size.
If you try any of these things anyhow, you’ll not have a great time. Every bong accommodates two types of joints, that are female and male. Both of these joints are specific in dimension, and you’ll solely install a water pipe on it if the male and female joints match.
Most often referred to as micro or nano joints, 10mm joints are normally solely discovered on pendant rigs or the smallest dab rigs designed for excessive portability. A 10mm joint is simple to determine as a result of it is extremely small. While smoking a glass water pipe, there is a high chance that particles could land in the chamber of the piece. Like dropdowns, glass adapters are compatible with glass pipes and water pipes.
If you possibly can match a dime by way of the feminine joint of your pipe or bowl piece, it’s 18mm. When buying equipment on your bong, corresponding to further bowls, nails, or ashcatchers, know the scale you’re looking for. You can’t squeeze a 18.8mm male nail into a 14.4mm female joint, and 10mm male bowls won’t get a decent seal on a 18.8mm female joint.

Especially now that we now have three easy steps listed proper right here that will help you measure your glass joint with ease. If the joint on your water pipe faces straight as much as the sky, you will need a nail angled at 90° to make sure it faces upwards when related to your rig.
Although you’ll be able to acquire an unlimited number of bong bowls, you should purchase a decent one for a pair hundred dollars. Male joints must be suitable with bong bowls and are replaceable with other random-sized bong bowls. The material utilized in bong bowls is especially glass as a result of it’s durable and may last a very long time.

For this reason what ever your size is make sure that you get one shorter than the measurement you acquired, or it may just not match. If you need a perfect size, hitus up and we will make one for you the proper size.
After testing the kind pen 510 thread variable voltage battery beneath, you’ll be able to put a mark on the down-stem at the final point below the joint. In this way, testing the filling level is completed easily. The picture beneath reveals you the way to determine what gender your bowl or bong joint is.

Products In This Article

You can use a pencil, pen or straight object you possibly can put all the way down in your water pipe or bong. Insert the thing into the feminine glass joint so that it’s about half of inch from the underside of your water pipe of dab rig. This would be the length of the down-stem needed on your piece. Remember there are so so many alternative lengths that a downstem can be and that alternative downstems are pretty standard.

When evaluating completely different dab nails, you will discover that some are designed with a ninety° angled neck, whereas some come with a 45° angled neck. This is to accommodate for differently angled water pipe joints, and to ensure that the nail is all the time going through upwards when linked. Usually offered by smoke retailers as 14mm joints, these are among the commonest joint sizes you will find.

How Do I Measure The Joint Size On My Female Bong?

Green Roads CBD Oils

Author Bio

Nataly Komova

Author Biograhy: Nataly Komova founded Chill Hempire after experiencing the first-hand results of CBD in helping her to relieve her skin condition. Nataly is now determined to spread the word about the benefits of CBD through blogging and taking part in events. In her spare time, Nataly enjoys early morning jogs, fitness, meditation, wine tasting, traveling and spending quality time with her friends. Nataly is also an avid vintage car collector and is currently working on her 1993 W124 Mercedes. Nataly is a contributing writer to many CBD magazines and blogs. She has been featured in prominent media outlets such as Cosmopolitan, Elle, Grazia, Women’s Health, The Guardian and others.


Chill Hempire








Categories: Uncategorized